Skip to content

Uniform design, manufacturing and supply for institutions in Egypt, with export to the Gulf, Africa and Europe

العربية
نسج مصر
Uniforms

Workwear and coveralls

Workwear and coveralls are the garments worn by operators and technicians in factories, warehouses, workshops and sites, from one-piece coveralls and two-piece work suits to work jackets, high-visibility vests and reflective safety jackets. We design, make and supply them in the company colour with its logo, in hard-wearing twill and with reflective tape where needed.

Last updated

5 garments Workwear and coveralls

Hotels and resorts، Industrial، Security، Aviation

Uniforms

Workwear and coveralls: Key specification

UniformsKey specificationCode
Coverall with reflective tape One piece, zip front, reflective tapeWW-01
Two-piece work suit Jacket or shirt with separate trousersWW-02
Work jacket Twill jacket with multiple pocketsWW-03
High-visibility vest Fluorescent vest with two reflective bandsWW-04
Reflective safety jacket Padded jacket with reflective tapeWW-05

What this category covers

Factory workwear protects staff from dust, oil and abrasion, makes them visible in aisles and loading yards, and tells visitors and supervisors which team each person belongs to. That is why we group workwear by the job.

Item Main job Where it fits Buyer note
Coverall with reflective tape Full body cover in one piece Production lines, maintenance and sites Keeps dust out of the gap between shirt and trousers
Two-piece work suit Jacket or shirt with separate trousers Factories, warehouses and maintenance teams Each part can be replaced as it wears
Work jacket Outer layer over the shirt Warehouses, workshops and outdoor work Tool pockets and adjustable cuffs
High-visibility vest Visibility over any clothing Loading yards, roads and car parks Light and worn over the daily uniform
Reflective safety jacket Warmth plus visibility Night shifts and outdoor work in winter Padded and shower-resistant depending on the model

Common workwear fabrics

The most common fabric for coveralls and work suits is polyester and cotton twill or drill at 65/35, because it stands up to frequent washing and holds its colour, typically at 220 to 280 grams per square metre. In hot areas or near heat sources many buyers prefer 100% cotton, which is kinder to the skin. High-visibility vests are usually made from a light fluorescent polyester. The right weight depends on the work and the heat on site, and is tried on the sample.

Reflective tape and visibility

Reflective tape goes around the chest, sleeves and lower legs so the wearer can be seen in poor light and in front of vehicle and forklift headlights. If your safety policy requires a specific high-visibility standard, send it with the request and we confirm in the quote which conformity documents can be provided.

Colours and branding

Many plants assign one colour per department, for example navy for production, grey for maintenance and orange for contractors and visitors, so a supervisor can tell from a distance who is where. The company logo is embroidered on the chest, and the company name can be printed in large letters on the back. Embroidery outlasts printing on workwear because it survives industrial laundering.

The sample and each department's sizes

Start with the headcount per department, the type of work and the season, then ask for a sample of the core item so staff can wear it on a real shift. Once the sample is approved we send the size chart, each supervisor collects sizes for the team, and the order is made and packed by department.

Care and replacement cycle

Workwear exposed to oil and grease needs hotter washing with a suitable detergent, ideally in an industrial laundry rather than at home. We suggest three sets per worker on daily duty. Replacement is due when seams tear or the reflective tape wears, since faded tape fails in poor light.

Frequently asked questions

Frequently asked questions

Coverall or two-piece work suit for a factory?
A coverall covers the whole body and suits maintenance and dirty work, while a two-piece suit is easier to put on and the trousers can be replaced alone when they wear out. Many plants use both, depending on the department.
Do you make flame-resistant workwear?
Flame-resistant garments need certified fabric and test documents. Tell us the required standard in your quote request and we reply with what can be supplied and which conformity documents are available before any commitment.
Does an embroidered logo survive industrial laundering?
Yes, embroidery in polyester thread withstands repeated washing at normal workwear temperatures better than printing. We confirm the method, position and size of the logo when the sample is approved.
Can each department have its own colour?
Yes, the same item can be made in a different colour per department, or in one base colour with a contrasting yoke or collar. Send the department map and headcount per department with your request.

Ready to dress your organisation?

Send the garments and approximate quantities and our team replies with a written quote and a sample proposal.