Uniform accessories · AC-04
Embroidered badge and patch
Embroidery on a base cloth, sew-on, iron-on or hook-and-loop backing
Add to quote requestUniform design, manufacturing and supply for institutions in Egypt, with export to the Gulf, Africa and Europe
العربية
Workwear and coveralls · Code WW-03
The work jacket is a hard-wearing outer layer worn over a work shirt or polo, with several tool pockets, adjustable cuffs and a zip or stud front. It suits warehouse, workshop, technician, maintenance and outdoor staff who need a jacket that resists abrasion, carries tools and carries the company logo.
Last updated
Suitable for
You receive a written quote and a sample proposal. Production starts once the sample is approved.
Not suitable for: Not suited on its own to severe cold or rain, as the basic model is unlined. The padded reflective jacket fits that better.
| Fabric | Polyester and cotton twill 65/35 |
|---|---|
| Typical weight | 240 to 280 gsm, confirmed in the quote |
| Closure | Zip with flap, or metal studs |
| Pockets | Two flap chest, two side, one inner, pen holder |
| Cuffs and hem | Adjustable cuffs, side-adjust hem |
| Options | Reflective tape, contrast yoke, light lining |
| Code | WW-03 |
A work jacket is an outer piece worn over a shirt or polo. It protects clothing from abrasion and dust and gives pockets for small tools, phone, pen and access cards. It differs from a formal jacket in its heavier fabric, double stitching at shoulders and pockets, and adjustable cuffs that stop sleeves catching in machinery.
It comes at waist length, which is the most practical for bending and climbing, or slightly longer to cover the top of the trousers. It can be ordered with matching cargo trousers as a set, or on its own over an existing uniform.
| Fabric | Composition | Typical weight | Best for |
|---|---|---|---|
| Blended twill | Polyester and cotton 65/35 | 240 to 260 gsm | Daily wear in warehouses and workshops |
| Heavy twill | Polyester and cotton 65/35 | 260 to 280 gsm | Abrasion and outdoor work |
| Cotton canvas | 100% cotton | depends on available cloth, confirmed in the quote | A traditional look and maintenance teams |
Canvas starts stiff and softens with wear, while blended twill feels the same from the first day.
The logo is embroidered on the chest and the company or department name printed on the back. Reflective tape can be added across the shoulders and sleeves for staff near forklifts, or a contrast yoke to mark supervisors.
Size by chest, leaving room for a shirt or sweater underneath in winter, which is why many buyers go one size up for staff who wear layers. Wash warm, and close the zip before washing so it does not damage the fabric.
The parts that tire first are the cuffs, the zip and the edges of pockets that carry tools. Double stitching and a metal or heavy plastic zip extend its life, and sharp tools are best carried in covered pockets only.
Ask for a sample first and try it with the tools staff actually carry, to check pocket placement. Then send the size table.
Uniform accessories · AC-04
Embroidery on a base cloth, sew-on, iron-on or hook-and-loop backing
Add to quote requestTrousers and skirts · TR-05
65/35 poly-cotton twill, cargo pockets and twin-needle seams
Add to quote requestWorkwear and coveralls · WW-02
Jacket or shirt with separate trousers
Add to quote requestBlazers and jackets · BJ-05
Three-layer softshell, full zip, fleece backing
Add to quote requestWorkwear and coveralls · WW-05
Padded jacket with reflective tape
Add to quote requestSend the garments and approximate quantities and our team replies with a written quote and a sample proposal.