Uniform fabrics: gabardine, poplin, pique and twill
This uniform fabrics guide explains nine common uniform fabrics: gabardine, poplin, oxford, twill, pique, dry-fit, microfiber, melton and knit. For each one it gives the usual composition, typical weight, best uses and care, so a procurement manager or a school, hospital or hotel administration can choose the fabric before asking for a sample.
Written by Nasj Egypt technical team, Design and production team at Nasj Egypt
Published · Last updated
Why fabric matters more than the cut
The real test of a uniform comes after months of washing. The cut and colour decide how a garment looks on the first morning; the fabric decides whether it still looks acceptable after a school term or a year of hotel shifts. The compositions and weights below are typical options for the fabrics we use most often, and the approved sample fixes the exact fabric for your order.
The nine fabrics at a glance
| Fabric | Typical composition | Typical weight | Best for |
|---|---|---|---|
| Gabardine | Polyester and viscose, or polyester and cotton | 220 to 300 gsm | Trousers, skirts, blazers, security and reception uniforms |
| Poplin | Cotton, or polyester and cotton 65/35 | 110 to 140 gsm | School shirts, blouses, light staff shirts |
| Oxford | Cotton, or polyester and cotton | 120 to 160 gsm | Corporate shirts and staff shirts |
| Twill | Cotton, or polyester and cotton 65/35 | 180 to 300 gsm | Coveralls, work trousers, chef jackets |
| Pique | Cotton, or polyester and cotton | 180 to 240 gsm | Polo shirts for schools, hotels and events |
| Dry-fit | 100% polyester knit, smooth or mesh | 130 to 180 gsm | PE kits, sports polos, outdoor staff |
| Microfiber | Fine polyester, often with spandex | 140 to 200 gsm | Medical scrubs, light jackets |
| Melton | Wool and polyester blend | 400 to 600 gsm | Winter blazers, coats, winter jackets |
| Knit (jersey, interlock, fleece) | Cotton, or cotton and polyester | 160 to 300 gsm | T-shirts, tracksuits, hoodies |
Weight is grams per square metre (gsm). A higher weight usually means more opacity, longer wear and more warmth, so the right figure depends on the climate as much as on durability.
Woven fabrics for shirts, trousers and blazers
Gabardine is a tightly woven twill with a smooth face and a fine diagonal line. In uniforms it is usually polyester with viscose for drape, or polyester with cotton for breathability. It holds a crease, resists wrinkling and suits trousers, skirts and blazers that must look formal all day. Wash at 30 to 40 degrees and iron on a medium setting, because high heat can leave a shine on polyester-rich blends.
Poplin is a plain weave with a fine rib, light and crisp. Pure cotton poplin breathes well but creases; a 65/35 polyester and cotton blend keeps its shape and dries faster, which is why many school shirts use it. Wash at up to 40 degrees and iron while slightly damp.
Oxford uses a basket weave, so it is a little thicker and more textured than poplin. It suits corporate shirts worn under a jacket and staff shirts that need a less formal look. It takes frequent washing well and its texture hides small creases.
Twill has a strong diagonal weave that resists abrasion, so it is the base for coveralls, work trousers and many chef jackets. Heavier twill suits factories and workshops; lighter twill suits kitchens and service staff. Polyester and cotton blends cope with industrial laundering; for pure cotton, ask about the shrinkage allowance.
Melton is a dense, felted wool and polyester fabric for winter blazers and outer jackets. It is warm, blocks wind and keeps a clean edge. It should be dry cleaned or washed on a wool cycle only, so it suits garments worn over other layers and washed rarely.
Knitted fabrics for polos, sportswear and T-shirts
Pique is a knit with a raised waffle texture, used for polo shirts. Cotton pique feels soft; a polyester and cotton pique keeps its colour and shape better after repeated washing. Wash inside out at 30 to 40 degrees to protect embroidery and print.
Dry-fit is a polyester knit made to move sweat away from the skin and dry quickly. It suits PE lessons, sports teams and outdoor staff in hot weather. Avoid fabric softener, which blocks the wicking effect, and avoid hot irons.
Jersey, interlock and fleece are the everyday knits for T-shirts, tracksuits and hoodies. Single jersey is light; interlock and fleece-backed knits are heavier and warmer. Cotton-rich knits feel cooler, while blends hold their size better.
Microfiber is a very fine polyester, often blended with spandex for stretch, used in modern scrubs. It is soft, light, quick drying and resists creasing. Check that it can take your laundry's wash temperature before you choose it for a hospital.
How to choose between them
| Your situation | Fabrics to consider |
|---|---|
| Heat, sweat or constant movement | Poplin, dry-fit, pique, light twill |
| Must look formal all day | Gabardine, oxford, melton for winter |
| Washed daily or in an industrial laundry | Polyester and cotton blends, twill |
| Comfort against the skin comes first | Cotton-rich poplin, pique, jersey |
| Worn outdoors in winter | Melton, fleece-backed knit, padded jackets |
What to put in your request
Tell us how the garment will be washed (at home, in a hotel laundry or a hospital laundry), how many days a week it is worn, the climate where it is used and whether fastness to sweat or chlorine matters. Ask for the composition and weight to be written against each item in the quote, and approve a sample before the full order. If you already use a fabric you like, send a piece of it or a garment, and we match it or suggest the closest available option.