Skip to content

Uniform design, manufacturing and supply for institutions in Egypt, with export to the Gulf, Africa and Europe

العربية
نسج مصر
Anti-static ESD lab coat, studio photo
  • Anti-static ESD lab coat, fabric and stitching detail

Lab coats · Code LC-05

Anti-static ESD lab coat

The anti-static ESD lab coat is a light coat in a fabric with conductive carbon threads woven through it in a grid, which bleed away the charge that builds up on a worker's clothing before it reaches electronic components. It suits electronics assembly lines, phone and computer repair centres and test labs, and snaps closed to the neck so it covers everything worn underneath.

Last updated

Suitable for

Add to quote request Request a sample

You receive a written quote and a sample proposal. Production starts once the sample is approved.

Not suitable for: Not flame-retardant, arc-rated or chemical protective clothing, and no substitute for the wrist strap and conductive flooring of the work area.

Specifications

Specifications

FabricPolyester with conductive carbon thread, or poly-cotton with carbon thread
Conductive patternSquare grid or lengthwise stripe, set on the sample
Typical weight100 to 190 gsm depending on fabric, recorded in the quote
FasteningConcealed front snaps up to the collar
CollarStand collar or shirt collar that closes at the neck
CuffsConductive knit, or a two-position snap
LengthMid-thigh or knee length
CodeLC-05

How the coat protects components

A synthetic shirt rubbing against the body or a chair builds a static charge the worker never feels, yet it is enough to destroy a chip or leave a latent fault that shows up months later at the customer. The fabric of this coat has a carbon thread woven in every few millimetres, lengthwise and across, forming a conductive grid that surrounds the clothing like a cage and drains the charge gradually to ground through the body and the wrist strap.

For the grid to work, the panels of the coat must connect electrically, so seams are sewn with the carbon threads of both panels touching, and the coat fully covers the collar and sleeves of whatever is underneath.

Fabric options

Fabric Typical composition Typical weight Best for
Carbon-thread polyester Polyester with a small share of conductive carbon 100 to 140 gsm Air-conditioned assembly lines, low-dust rooms
Carbon-thread blend Polyester and cotton with carbon thread 150 to 190 gsm Repair workshops, wearers who prefer a cotton feel
Conductive knit for cuffs Polyester with conductive yarn depends on the model Steady contact with the wrist

Pure polyester sheds almost no lint, which is why it is preferred near exposed boards. The cotton blend is kinder in heat but releases short fibres, so we do not recommend it for rooms where particle counts are monitored.

The cut an ESD coordinator asks for

Outer pockets stay, without flaps that rub, and there are few of them: a chest pen pocket and two lower pockets. The snaps sit under a fly so no metal touches a board lying on the bench. The cuff is a conductive knit that grips the wrist lightly, or a two-position snap for those who wear the wrist strap beneath it. Some plants ask for a side slot for the strap's cord.

Logo and markings

The logo is printed or embroidered small on the chest. Large embroidery covers part of the grid and adds insulating thread, so we keep it to the smallest area. The ESD protected area symbol can be added on the sleeve.

Washing decides how long the property lasts

Carbon thread does not wash out, but fabric softener coats the fibres with an insulating film and bleach weakens the conductive yarn. Wash with a neutral detergent at a low temperature, with no softener and no bleach, and air dry. Measure the resistance of a sample of coats periodically with your own meter, and pull from the line any that fall outside your limit.

What we agree before cutting

We do not issue a conformity certificate of our own; the measurement that counts is yours. Send the surface resistance range your plant's ESD programme requires, and we send a fabric swatch and a sample coat for your coordinator to test with his meter, before washing and after several washes. The fabric is approved on that result.

Complete the set

Complete the set

Alternatives

Frequently asked questions

Frequently asked questions

Does the coat carry a certificate to an ESD standard?
We do not claim a certificate we do not hold. The quote states the fabric composition and conductive pattern, and your ESD coordinator tests the sample with a meter against the standard your plant applies before the order is approved.
Is the coat enough without a wrist strap?
No. The coat stops charge on clothing from reaching components, but the body's own charge is drained by the wrist strap or by conductive footwear and flooring. It is one link in the protection scheme.
Why is fabric softener forbidden?
Softener leaves an insulating, waxy film on the fibres that raises the surface resistance of the cloth, so the grid drains charge less well. The effect shows on the meter after only a few washes.
Does it suit small phone repair shops?
Yes, it is common in service centres that open devices at the bench. For those we suggest the cotton blend at mid-thigh length, with the centre's logo printed small on the chest.

Related guides

Request a quote

Ready to dress your organisation?

Send the garments and approximate quantities and our team replies with a written quote and a sample proposal.