Skip to content

Uniform design, manufacturing and supply for institutions in Egypt, with export to the Gulf, Africa and Europe

العربية
نسج مصر
Guides

Planning school uniform quantities and size splits

Planning school uniform quantities starts from the number of wear days per week, how often families wash, PE days and winter items, plus a few spare pieces. The size split then comes from a sizing day, the previous year's records and a growth allowance. This guide is for school administrations and procurement staff preparing a quote request.

Written by , Design and production team at Nasj Egypt

Published · Last updated

Two separate questions

A school uniform order answers two questions that are often mixed up. The first is how many pieces of each item one student needs. The second is how those pieces split across sizes. Getting the first wrong leaves families short or leaves cartons of unsold pieces. Getting the second wrong is worse: the total is right but half the class cannot wear what arrived. This guide gives a method for both. It does not give fixed numbers, because they depend on your timetable, your families and your climate.

Step one: pieces per student

Work item by item from how the uniform is actually worn and washed.

  • Wear days. Count school days per week, and note any days when a different item replaces the daily uniform, such as a PE day or a weekly tracksuit day.
  • Wash cycle. Ask how often families usually wash. A shirt worn every day and washed twice a week needs enough pieces to cover the days between washes.
  • One in the wash. Add one piece that is drying or waiting to be ironed.
  • Spare. Add one spare for stains, accidents and lost items, at least for shirts and PE T-shirts.
  • Seasonal items. Pullovers, cardigans, blazers and jackets are worn over other layers and washed less often, so one or two per student is usually the planning basis.

A simple rule follows: pieces needed equals wear days between washes, plus one in the wash, plus one spare where it matters.

Item How it is worn Planning basis Example: 5 school days, washed twice a week
Shirt or blouse Every uniform day, next to the skin Days between washes + 1 + spare 3 + 1 + 1 = 5
Trousers, skirt or pinafore Every uniform day, can be worn twice Fewer than shirts 2 to 3
Pullover or cardigan Winter, over the shirt Seasonal, washed less often 1 to 2
Blazer Formal days or winter Seasonal, often dry cleaned 1
PE kit PE days only PE days between washes + 1 Depends on PE days
Tracksuit PE days or outdoor winter days Seasonal 1
Tie Every uniform day Low wear, easy to lose 1 + 1 spare

The example column is arithmetic from the stated assumptions, not a recommendation. Replace it with your own timetable and wash pattern.

Step two: the size split

The size split matters more than the total. There are four common sources of size data, and the strongest plans combine them.

Source Strength Weakness
Sizing day with a try-on size set Real measurements of real students Needs a day on the school calendar
Previous year's sales by size and stage Free and already in your records Students have grown since then
Parent forms with height and age Easy to collect Parents often guess or round
Estimate from student count only Quick Highest risk of wrong sizes

Sizing day. A sample of each size is brought to school, students try them on by class, and the result is recorded per student. This is the most reliable method, especially for a new uniform or a new supplier whose size chart differs from the previous one.

Previous-year records. If you sold uniforms last year, the sales by size and stage show how your population is spread. Shift each group up by the growth you expect before the new year starts.

Growth allowance. Students grow during the year. For younger stages many schools order one size up where a student sits between sizes, and some cuts include extra hem allowance. Decide this rule once and apply it to every class, so the size list stays consistent.

Reserve. Keep a limited reserve of the most common sizes per stage for new joiners and exchanges. Set its share with us from your own late-joiner numbers last year rather than a fixed percentage.

Splitting the order

Send the quantities as a table split by stage, gender and item, with a count for each size. If you sell to parents through the school, add the expected optional items separately from compulsory ones. If you want bags packed per student or per class, send a list of names and sizes, and each bag is labelled from that list.

Main batch and top-up batch

Start the size work early, so a late correction is made before the uniforms reach families. If admissions stay open until close to the start of term, split the order into a main batch for confirmed sizes and a small top-up batch once new-student numbers settle, rather than holding back the whole order.

Before you send the request

Prepare the student count per stage and gender, the list of items with compulsory or optional marked, your wash and timetable assumptions, any previous-year size records, and your decision on a sizing day. With these, the quote is priced on your school's own numbers.

Garments in this guide

Blazers and jackets

Knitwear

Shirts and blouses

Tracksuits and sportswear

Trousers and skirts

Frequently asked questions

Frequently asked questions

How many shirts does one student need?
It depends on school days per week and how often the family washes. Count the wear days between two washes, then add one piece in the wash and one spare. If the school sells to parents, publish a recommended number per item and leave extra pieces optional.
Should we order winter items for every student?
Not always. A pullover is usually a core item for each student, while a blazer or padded jacket may be optional depending on school policy and the local climate. Separate compulsory from optional items in the request so surplus pieces do not pile up in the store room.
How do we handle students who join after the year starts?
Keep a small reserve of the most common sizes in each stage, and set its share with us from the number of late joiners last year. A small top-up order during the year is also possible.
What if the sizes we ordered do not fit some students?
That is why we prefer a sizing day with a set of try-on sizes before the full order, since it reduces errors far more than estimating. Any exchange or top-up arrangement is agreed in writing before production starts.
Do we send the order by student or by size?
Send a table split by stage and gender with piece counts per size. If you want bags packed per student or per class, send a list of names and sizes and we pack and label from it.

Ready to dress your organisation?

Send the garments and approximate quantities and our team replies with a written quote and a sample proposal.