Skip to content

Uniform design, manufacturing and supply for institutions in Egypt, with export to the Gulf, Africa and Europe

العربية
نسج مصر
Guides

Embroidery or printing on uniforms? Logo methods compared

Choosing embroidery or printing on uniforms depends on the fabric, the logo detail, the washing method and the quantity. This guide compares embroidery, sewn patches, heat transfer, screen print, sublimation and DTF on durability, detail and setup, to help schools, companies, hospitals and hotels pick the right method for each garment.

Written by , Design and production team at Nasj Egypt

Published · Last updated

What decides the method

The same logo can be embroidered, sewn on as a patch or printed in four different ways, and each method behaves differently on the fabric and in the wash. Four facts settle the choice: the fabric of the garment, how detailed the logo is, how the uniform is washed, and how many pieces carry the same design.

The six methods side by side

Method How it works Suits these fabrics Fine detail Wash durability Setup
Embroidery Thread stitched into the fabric by machine Woven fabrics, pique, fleece, heavy knits Medium, very small text is hard High A digitised stitch file, made once per logo
Patch A woven or embroidered badge sewn or pressed on Blazers, jackets, caps, workwear Depends on the patch type High when sewn Patches made first, then attached
Heat transfer A cut or printed film pressed with heat Cotton, blends, polyester Medium Medium, can crack with hot washing No screens, suits names and numbers
Screen print Ink pushed through a screen, one screen per colour Cotton and blended T-shirts and hoodies Good for bold shapes Good when properly cured One screen per colour
Sublimation Dye turned to gas and bonded into polyester Light-coloured polyester only Very high, full colour Very high, the print is part of the fibre Full design printed on paper, often cut and sewn after
DTF Full-colour print on film, transferred with heat Cotton, blends, polyester, dark colours High, full colour Good with correct care No screens, suits short runs

Embroidery

Embroidery stitches the logo into the garment with thread, so it lasts as long as the garment and survives industrial laundering and high wash temperatures. It gives a raised, formal look that suits blazers, corporate shirts, polo shirts, scrubs, lab coats and caps. Its limits are fine detail and size: very small text and thin lines lose clarity, and a large embroidered area on a light shirt can feel stiff. Each logo needs a digitised stitch file, made once and reused on every reorder.

Patches

A patch is a badge made separately, either embroidered or woven, then sewn or pressed onto the garment. Schools often use them for blazer crests, and companies use them on jackets and workwear where the fabric is thick or the garment is already finished. Patches can be produced ahead and attached later, and woven patches hold finer detail than direct embroidery.

Heat transfer

Heat transfer presses a cut or printed film onto the fabric. It needs no screens, which makes it practical for names, numbers and small runs. It suits sports kits and event T-shirts. With frequent hot washing and tumble drying it can crack or lift at the edges, so it is less suited to daily industrial laundering.

Screen print

Screen printing pushes ink through a fine screen, one screen per colour. Once the screens are made, every further piece is quick to print, so it works well for larger runs of the same design on cotton and blended T-shirts and hoodies. Logos with many colours or photographic gradients need many screens and are better printed another way.

Sublimation

Sublimation turns dye into gas that bonds into polyester fibres, so the print becomes part of the fabric and does not crack or peel. It allows full-colour, edge-to-edge designs, which is why it is common on football kits and sublimated T-shirts. It only works on polyester or polyester-rich fabric in light colours.

DTF

DTF (direct to film) prints a full-colour design onto film, which is then transferred with heat. It works on cotton, blends and polyester, including dark colours, and needs no screens, so it suits short runs, mixed designs and logos with many colours. It sits on the surface of the fabric, so follow the care label: wash inside out and avoid ironing directly on the print.

Which method for which garment

Garment Usual choice Why
School or corporate blazer Embroidery or patch Formal look, long life
Polo shirt Embroidery on the chest Holds up to frequent washing
Event or campaign T-shirt Screen print or DTF Many pieces or many colours
Football or team kit Sublimation, plus heat transfer for numbers Full design, names and numbers vary
Scrubs and lab coats Embroidery for logo and name Survives hospital laundering
Caps Embroidery or patch Curved surface, small area

Quantity and reorders

The number of pieces also shapes the choice. Screen print and embroidery need setup first, the screens or the stitch file, after which each extra piece is simpler, so they suit large runs and repeat orders of the same design. DTF and heat transfer need no such setup, so they suit short runs and changing names. For reorders we keep the stitch file, colour references, sizes and logo positions, so a new batch matches the previous one. The written quote states the proposed method for each garment and why.

Before you send the logo

Send a vector file (AI, EPS, PDF or SVG) and colour references if you have them, and say where the logo goes on each garment and at what width. We prepare a proof for approval, then show the chosen method on the sample before production.

Garments in this guide

Uniform accessories

Blazers and jackets

Medical scrubs

Polo shirts and T-shirts

Tracksuits and sportswear

Frequently asked questions

Frequently asked questions

Which method suits a school blazer crest?
Usually direct embroidery on the breast pocket, or an embroidered patch sewn onto it. A patch helps when you want crests made in advance or reused on new blazers, while direct embroidery looks cleaner on heavy fabrics such as melton and gabardine.
Can each employee's name be added to their uniform?
Yes. DTF and heat transfer suit names and numbers that change from piece to piece, because they need no screen per design. Names can also be embroidered on scrubs and lab coats. Send the names together with the sizes in one file.
Will printing survive industrial laundering in hotels and hospitals?
Embroidery copes best with industrial washing and high temperatures. Print durability depends on the method, the fabric and the wash temperature, so tell us how you launder and we recommend a method and its care instructions on that basis.
What logo file should we send?
A vector file in AI, EPS, PDF or SVG format, with colour references if you have them. If you only have an image, send the highest resolution available; we prepare the embroidery or print file from it and send you a proof to approve.
Can more than one method be used on the same garment?
Yes, and it is common. Examples are an embroidered logo on the chest of a polo with an event name printed on the back, or a patch on the blazer with an embroidered name on the shirt. We set the method for each position, and you see it applied on the sample before production.

Ready to dress your organisation?

Send the garments and approximate quantities and our team replies with a written quote and a sample proposal.